KTM Husqvarna 150 TBI conversion kit SX/TC/XC
$1,649.99
Pickup currently unavailable
*Please read fuel, oil, and TPS requirements before purchasing this product and any other 125/250/300 ECU related modification*
You must be able to adjust and set your TPS values with a TPS tool, or a volt meter and pig-tail set up. Those items can be found on the Electrical and Sensor page.
We have specified a min octane rating of 100, and recommend a 40/1 ratio for all the bikes with a high quality premix that has a flashpoint of 300 or more.
We have only tested oxygenated fuels up to 5.6%, results may vary.
We have tested many oils and have found great metal to metal engine protection with Motul 710 for single track or slower MX, (FP of 310 deg), and Motul 800 for hard MX, (FP of 480 deg).
We have also been running the motors with forged pistons and removing the thermostat for a more balanced running bike.
The PowerParts kit comes with everything shown to convert your KTM & Husqvarna 125 TBI into a 150 TBI. You will need to have your ECU re-flashed for the 150, this can be done through us with our proven mapping or through your dealer.
The kit includes the 150 TBI cyl, insert, pv flapper parts, flapper bushings and o-rings, OEM 150 2 ring cast piston, rings, pin, c-clips and pin bearing, all top end gaskets and o-rings, and crankcase pressure sensor and boot. Just set the deck height of the cyl, reset your pv on both maps, and break her in.
If you have a 23' 125, consider upgrading to some (6) hole injectors for a better atomization of fuel.